Guides for Tornado 300 from Easy Camp

1. When unpacking the tent, it is a good idea to familiarise yourself with how it should be repacked. 2. Spread out the flysheet on an area that is as even and clean as possible. Peg down the loops on front and rear. Close the entrance. 3. Open the valves positioned at the lower side of the flysheet and pump enough air into the beams to erect the tent well tensioned. Do not inflate the tubes too hard as in this case, sunlight might cause an overpressure which could damage the tent. 4. Position the tent as required and peg it down all around through the webbing loops....