Guides for MG640 from Hyundai

1) Attach the cutter housing to the motor unit. 2) Insert the worm shaft into the cutter housing, the plastic end first. Place the cone in the cutter housing. Place the former on the cutter housing and screw the ring on the cutter housing. (Make sure the notches of the separator fit onto the projections of the mincer head.) 3) Place the tray on the upright part of the cutter housing. 4) Now the appliance is ready for making kebbe. Making Kebbe: Feed the prepared kebbe mixture through the kebbe maker. Cut the continuous hollow cylinder into the desired lengths and user as required....