Guides for KN-SCOPE40 from König

DIRECTIONS FOR USE 1) Extend the legs (Q), as indicated in Fig. 1, and lock them in the adjusted height with the supplied wing nut (1). Before tightening the wing nuts check that there is a washer underneath. 2) Connect all there tripod legs to the head (O) with the wing nut and screw (2) in the manner indicated in Fig. 2A. 3) Now fasten the accessory tray (P) to the flanges of the tripod legs with the supplied screws and wing nuts. (see Fig. 3) 4) After all screws have been firmly tightened, the telescope can be connected to the Yoke (M) of the tripod head....